Satroaming 2.35.16.5

- Changed over to OpenStreetmaps.
- Fixed latlon items.
- Fix for inserting data in local MySQL (trim)
- iDirectmode fix: antenna on Manual still positions the cursor.
- Preparation for adding MSS services in monitoring

Satroaming 2.35.15.33
- Added selection for X5 / X7 iDirect on optionfile path.
- Fix for modem-LED when iDirect modem communicates.
- removed the 0kbps messages for the iDirect.

Satroaming 2.35.15.31
- Changed Autoroaming for comtech to use footprint-ID’s, not beam-id’s.

Satroaming 2.35.15.27
- Fix on debug mode only for Modems

Satroaming 2.35.15.25
- Fix in antennapointing device on screen-vessel
- Added aditional info for MyiDirect engine
- few fixes for idirect functionality
- iDirect roaming messages are sent for ABS and Manual.
- System sends an email on 30 and 15 days before expire.
- Option added in Setup to enter license without restart.

Satroaming 2.35.15.19
- Added buffers to get a clean compass (Blue cisrle issue)
- Added BUC-LO for QOR o 4900 in the pulldown-list.
- Fix for setting Amip-proxy in the right way to avoid dataloss.
- Fix for antenna’s needing fake TX-frequency in parameters.

Satroaming 2.35.15.19
- Fix for swapping messages in lat/lon when in iDirectmode with Amip-proxy mode
- Added internal managment command to reboot satroaming-VM remotely if needed.

Satroaming 2.35.15.17
- Added option to change iDirect password in the satroaming-config.

Satroaming 2.35.15.16
- Finalised Cobham Sailor integration in Satroaming (Amip 1.0.2.13 or higher needed)

Satroaming 2.35.15.15
- Added Ping-check in roaming-process (flag set in config)

Satroaming 2.35.15.14
- Added Thrane and Thrane / Sailor Antenna’s -> Needs Amip.exe version 1.0.2.12 or higher

Satroaming 2.35.15.13
- Fix for update in portal
- Fix for high CPU in remote-command mode
- Preparation for multi-parameter depending roaming
- Cleanup code from interconnect-code

Satroaming 2.35.15.3
- Added option to set tuner for seatel -> needs seatel 1.0.7.12

Satroaming 2.35.15.2
- iDirect integration!
- Fix for floating-point and integer errors.

Satroaming 2.35.14.2
- Added a specific route editor to edit RT#1 in the modem in Setup

Satroaming 2.35.14.0
- Fix for ip-ports larger than 4 digits (amip only)

Satroaming 2.35.13.0
- Added identification in Banner of main Form.

Satroaming 2.35.12.10
- Fix for AGC-bar in AMIP and Orbit.
- Unused Icon’s are cleared when restarting Satroaming.
- Added option in advanced setup to set ebno-alarm point for Combi-Cables

Satroaming 2.35.12.9
- Added ebno alarm-point for advanced dual setup switch module (CombiTronics – Multimodem interface)

Satroaming 2.35.12.7
- Added Advanced VSAT options
- QOR antenna compatibel (seatel)
- Inter Process Communication enabled

Satroaming 2.35.10.3
- Changed the vessel for a better view
- Fix in Advanced settings, lockup fix.

Satroaming 2.35.10.2
- Added support features in advanced setup.
- In vessel-view you can drag the antenna to actual position on your vessel.
- Skinned the design to have a better look.
Satroaming 2.35.10.1
- Fix for VMS inversion for IF-band systems.
Satroaming 2.35.10.0
- Footprints now added for roamingzones, may be adjusted seperately

Satroaming 2.35.9.7
- Footprints across 180′ fix in database.
- Added roamzones for autoroaming (footprint-db version 21 and up).
Satroaming 2.35.9.5
- Fix: Manual Handover also updates the sat-indicator now.
- Added last known satellite in mainscreen
- Fix in autoroaming (reads last known sat to choose)
- Fix in LED for RS232-connection to seatel
Satroaming 2.35.9.3
- Added seatel-serial (rs232) model in selction
- ignore ’0′ elevation from ACU.
Satroaming 2.35.9.0
- Added support for ECMv2 when using IF-modems (fix to solve comtech-bug)
Satroaming 2.35.8.1
- Fixed ecm2 settings in modem config
Satroaming 2.35.8.0
- Added AutoBeamSwitching
Satroaming 2.35.7.4
- Added KNS  Antenna support
- Autoroaming implemented, first trial starts today!
Satroaming 2.35.7.0
- Google Maps API3 change fix for error on screen
Satroaming 2.35.6.1
- Added Antenna Led color Purple for not connected to acu message.
- Fixed lockup afte advanced settings
- Preparations made for full autoroaming
Satroaming 2.35.6.0
- Fixed error in google maps screen on board, google maps API was changed.
Satroaming 2.35.5.0
- Fixed timesync issue (needed to be disabled for VM), problem caused lockup onmain-screen.
- Added Databasecheck if Inclined-flag is present or not.
2.35.4.4:
- Fixed IF system extra-reg for Vipersat
- Popup during handover on all screens visible
2.35.4.2:
- Fixed C-band LO issues and calculations for inversion on L-band BUC/LNB
- Fixed this for all Brands Antenna.

MyiDirect 1.0.0.28

- Fix in error caused by LATLONG message
- Added selectable optionfile path for X5/X7 etc.

MyiDirect 1.0.0.23
- Fix in wrong info received from modem
- Fix in uploading optionfile
- Formatting of fields in receive adjusted.
- Keep old value when not receiving info.

MyiDirect 1.0.0.20
- Fix in reconnect script after roaming/reboot
- Disconnecto forced on error in send.
- Fix in Optiofile upload to modem
- Added current satellite in Satroaming message for detection

MyiDirect 1.0.0.14
- Fix for the dataqueue which caused memoryleaks
- Fix for TX-power, now logged centrally in the right way.

MyiDirect 1.0.0.10
- Added option to up and download optionfiles
- Create password entries if not present (encrypted data)
- Several fixes for formatting data-fileds.

MyiDirect 1.0.0.4
- New release for satroaming integration
- Reading all needed values for satroaming
- Capable to upload and download optionfiles
- reads availlable beams for beamswitching and puts them in satroaming for manual handover purposes

NOTE: Upload and Download speed are not readable in the modem.

Updater 1.0.9.10

- Fix for downloads that fail after X minutes.
- Timer adjusted to wait for 5 minutes for extra packets, if not close updater, which will be restarted.

Updater 1.0.9.9
- Checksum fix.
- No new download if checksum already matches.

Updater 1.0.9.8
- Fixed Orbit repetitive upgrade when seatel was on minor update

Updater 1.0.9.7
- Fix for updating Amip and Roam.

Updater 1.0.9.6
- Fix to solve multiple icons in systemtray
- Update procedure changed partially

Updater 1.0.9.2
- Satroaming will be started when it is not active after 5 – 10 minutes.
Updater 1.0.9.1
- Fixed MD5 check on the seatel and orbit updates.

Roadmap of Satroaming

Achieved goals:

- Full support integrated by Cobham for Sailor antenna’s. Thanks for the good and nice cooperation!
- Email sent when license starts to expire.

To be done:
- Add central manageable policy settings
- Platform roaming; switching between 2 or more platforms
- Beam-related margins for roaming
- weathermaps
- Pushmessages to be shown in screen for vessel-owners

Seatel 1.0.7.15

- Fix for invalid integer value.

Seatel 1.0.7.13
- Added extra lines for MXP/QOR controller; command was changed by seatel.

Seatel 1.0.7.12
- Tuner is no longer read, now has to be set in menu satroaming 2.35.15.3
- Fixed tracking-frequency issue when n0 tuner could be read.
- Fixed satellite longitude command.

Seatel 1.0.7.7
- Fix for invalid integer caused in AGC-measurement.

Seatel 1.0.7.6
- MXP error-message detection corrected.
- Added buffer clear for MXP-prompt, fixing sat on 0 degrees

Seatel 1.0.7.3
- Fix for invalid integer message, MXP only (ErrorCode is not read correctly)
-Fixed East/West indication for MXP controllers

Seatel 1.0.7.0
-QOR fix to support both inclined and normal satellite.

Seatel 1.0.6.11
- QOR pol fix for Circular
- Added save function for QOR and standard DAC solution
- MXP functionallity added

Seatel 1.0.6.4
- Added QOR options, switch antenna to C or Ku depending on LO
- Added L and R pol for QOR antenna’s

Seatel 1.0.6.2
- Added IPC communications
- Added check on values sent to satroaming, if between right values
Seatel 1.0.6.1
Major update to force update to all vessels

Seatel 1.0.5.5
- Fix on seatel reconnect. localport is now variable (TCP range 2100-2200)
Seatel 1.0.5.4
- Added serial-port to M&C on DAC because comif fails once in a while.
- Fix on reading values and getting invalid integer. (busy flag added)
Seatel 1.0.5.0
- Major fix for multiLNB connected / fed from DAC. (re-arranged commands to DAC)

Seatel 1.0.4.1
- Added Not connected to acu message in error response.
- Added smal delay between commands to give the DAC a bit more time to process requests
Seatel 1.0.4.0
- Fixed Display-type issue for Local/Remote LNB voltages/Tones
- Fixed tunertype detection
Seatel 1.0.3.0
- Fixed issue : “not valid float value”
- Added inclined support.

Amip 1.0.3.4

- Fix for dataqueue to avoid memory-leaks
- Amip proxy fix
- Tested on special emulator which can generate errors of different kind/brand.
Amip 1.0.2.28
- Fix for Furuno100 Antenna reading azimuth etc.
Amip 1.0.2.27
- Fix for tracking frequency, decimal values below 100kHz were sent wrongly to ACU’s
Amip 1.0.2.25
- Fix for non standard amount of spaces in the messages
- Fix for CR and LF in messages
- Adjusted methodology for decoding messages
Amip 1.0.2.14
- Auto repoint after reconnecting in ‘ BRAND’ mode, and proxy disabled (any Brand with extension)
Amip 1.0.2.13
- Added option to recognise Satlon in E/W notation (normal negative for west).
Amip 1.0.2.12
- Created extra settings for Satroaming Sailor antenna.
Amip 1.0.2.11
- Added TX-frequency for Sailor Antenna’s.
Amip 1.0.2.10
- Fix for wrong variable to check.
Amip 1.0.2.9
- Fix fr LAT-LON not shown
- Added proxy-mode for iDirect support
- Created TX-frequency flag to send center TX-freq for Sailor-antenna.
- Added Sailor antenna’s support.

- Fix for error in send while Amip not connected.
Amip 1.0.2.0

- Moved to IPC (inter process communication) for better  performance.
- Added options for more brands in the future
- increased screen updates in satroaming from 30 sec to 5 sec interval.
Amip 1.0.1.12
- Added circular pol for C-band combined antenna’s
Amip 1.0.1.11
- Added clear response command to avoid error message ‘port allready in use’ .
- Added Not connected to acu message in error response.
- KNS Antenna is now compatible and added!
AMIP 1.0.1.8
- Added support for Intellian Linear/Circular switching.
Now supporting Intellian, Furuno100, Mitsubishi, Jotron

CDM570 1.0.4.0

- Fix for modem not responding on SNMP by using different ports on source-side

CDM570 1.0.3.0
- Added recovery timer for snmp-requests
- Advanced VSAT read-snmp added (840 types)

Orbit 1.0.2.2

- Migrated from UDP to IPC for better performance
- Added received datacheck integrity.
- Increased screen updates to 7.5 second interval (was 30 sec)
Orbit 1.0.2.1
- Variable LO in database fix, different LO selects right dc/tone now.
Orbit 1.0.2.0
- Polarisation indicator fix.
- Added not connected to ACU message to satroaming main-application.
- Prepared for dual-antenna opperation, satroaming main needs change for this.